The Boot Process - Contemporary Controls CTRLink EIAR-10T User Manual

3.7

The boot process

During the boot process, all services and programs required are started
automatically.
This process will take approx. 2 minutes.
Starting the boot process:
States of the LEDs:
ACTIVE MODEM:
ACTIVE ETHERNET:
ERROR:
POWER:
The settings are loaded.
States of the LEDs:
ACTIVE MODEM:
ACTIVE ETHERNET:
ERROR:
POWER:
A check is carried out to see whether the ETHERNET connection can
be addressed.
States of the LEDs:
ACTIVE MODEM:
ACTIVE ETHERNET:
ERROR:
POWER:
All relevant services, such as firewall and routing, are initialised. The
configuration of the ETHERNET connection is finished.
States of the LEDs:
ACTIVE MODEM:
ACTIVE ETHERNET:
ERROR:
POWER:
The boot phase is now completed; the router is ready for operation.
States of the LEDs:
ACTIVE MODEM:
ACTIVE ETHERNET:
ERROR:
POWER:
off
off
off
green
off
off
red
green
off
red
red
green
off
green
red
green
off
green
green
green
Description of Functions
3-15