Table of Contents
Advertisement
Configuration
Enter a name for your connection (e.g.: "Zero modem"):
If you are connected to a private telecommunications switching system,
please note that no dialling tone is to be heart in the telephone. In this
case, you must configure the modem such that it does not wait for the
dialling tone. To this end, the initialisation command "ATX3" must
additionally be entered in the tab "Advanced settings" in the modem
configuration in the device manager of Windows 2000.
Use "Select" to establish a new connection:
Enter 'extern' as the user name for yourself, too, and 'ctr' for the
password (default values). Now call a browser and type the following
address: 192.168.6.1
4-29
Advertisement
Table of Contents
Need help?
Do you have a question about the CTRLink EIAR-10T and is the answer not in the manual?