The External Monitor Is Blank Or The Image Is Unstable - Fujitsu Siemens Computers Professional Notebook Operating Manual

Troubleshooting and tips

The external monitor is blank or the image is unstable

Externalmonitor: Externalmonitor:
Cause
The wrong external monitor has been selected
or the wrong screen resolution has been set for
the application programme.
50
Troubleshooting
Windows XP:
► Terminate the application program in
Windows by pressing
► If the fault persists after closing down the
program, press the key combination for
Switching the screen output to switch to the
LCD screen of the notebook and change the
following settings:
► Select the correct monitor or set the correct
screen resolution.
– Select the monitor: Start - (Settings) -
Control Panel - Display - Settings - Advanced
- Monitor
– Set the screen resolution: Start - (Settings)
- Control Panel - Display - Settings, Screen
resolution field.
Windows Vista:
► Terminate the application program in
Windows by pressing
► If the fault persists after closing down the
program, press the key combination for
Switching the screen output to switch to the
LCD screen of the notebook and change the
following settings:
► Set the screen resolution: Select the
desired screen resolution under Start –
(Settings) – Control Panel – Appearance and
Personalization – Personalization: Adjust screen
resolution
► Select monitor: Right-click on the desktop.
From the menu click on Personalize – Display
Settings and select monitor 1 or 2 and then
select the correct screen under Advanced
settings – Monitor.
A26391-K200-Z126-1-7619, edition 3
Alt + F4 .
Alt + F4 .