Product Modification; Safety Information; Before You Begin - Core Lighting ColourPoint MK2 User Manual

Product Modification
This CORE Lighting product has been designed and manufactured to meet the strict requirements of UK, EU and
International safety regulations. Any unauthorised modifications to the product including replacement of parts with
non‐standard parts could compromise safety and result in the product being non‐compliant with relevant standards.
If the hirer modifies the unit in any way without consent from ABC Production Services, they will be liable for a
repair charge and additional hire charges while the unit is out of use.
There are no user serviceable parts within this product.
Safety Information
Important safety information is contained within this manual. Please read all instructions fully prior to installation
and use of the equipment.
Internationally recognised symbols are used within the document to highlight important messages as follows:
Critical installation or usage information.
Failure to comply with this information may cause damage to the product, third party
equipment or cause harm or injury.
Important installation or usage information.
Failure to comply with this information may cause the product to operate incorrectly.
Note: Restrictions apply to transporting this equipment on aircraft due to the lithium
polymer batteries having capacity greater than 100Wh. Please consult IATA Packing
Instructions for further information.
Before You Begin
The CORE ColourPoint fixture is a battery‐powered wireless up‐lighter capable of providing portable and instant
architectural and feature lighting anywhere. With high‐powered red, green, blue and white LEDs the fixture is
capable of producing any colour or shade of white using combinations of those LEDs. Ideal for illuminating buildings
in colour, both indoors and outdoors, the fixture is powerful enough to light buildings of 3 or 4 storeys. Lighting
effects may be created by connecting to effects generators such as lighting desks or other CORE Master units using
the in‐built Wireless DMX receiver. Simply connect wirelessly to the transmitter of the generator.
The product is designed and manufactured in the UK.
© 2015 ABC Production Services Ltd. (www.abcgb.com), all rights reserved
5