Placement Options; Ml-66I, & Ml-80I Speakers); Placement Options (Ml-62I Stereo Speaker) - MartinLogan ML-60i User Manual

When choosing placement follow these simple tips:
• Place a minimum of 12-inches (30cm) from any wall corner.
• Place fronts/centers equidistant between 10–14 feet (3–4.3m) from the listening position.
• ML-67i: Install in-ceiling only.
Placement Options (ML-60, ML-65i, ML-66i, ML-80i)
(no illustration)
Stereo and Home Theater Applications
MartinLogan Installer Series in-wall and in-ceiling speakers are ideal for 2-channel stereo
and multi-channel home theater installations. The guidelines from the previous section
apply to both in-wall and in-ceiling speakers.
(Fig. 1a)
Multiple Speakers, Distributed Audio
In larger areas (offices, etc.) multiple speakers may be used to eliminate the sound
imbalances that occur with separate stereo speakers as people move around the room,
or are seated closer to one speaker than the other. Position speakers to achieve the
broadest sound coverage in the main listening area.

Placement Options (ML-62i Stereo Speaker)

ML-62i speaker offers two options for connection to an amplifier:
• 2-channels from a single speaker (2 amp channels connected to the speaker)
• 1-channel with wide dispersion (bridged for mono, 1 amp channel conencted).
2-Channel Sound From a Single Speaker (Fig. 2a)
Ideal in smaller areas a single speaker is the preferred choice. The ML-62i is connected
to the amp's left and right channels. Position the speaker to achieve the broadest sound
coverage in the main listening area. Connect left and right channels to the speaker.
5.1-Channel Wide Dispersion Surround Placement Using Two Speakers (Fig. 2b)
Place an ML-62i on either side of the listening area. Orient so one tweeter points toward
the front of the room and the other points toward the back. Bridge each speaker for mono
and connect the amp's left and right surround channels to the appropriate speakers.
(Fig. 2c)
6.1-Channel Wide Dispersion Rear Placement Using One Speaker
Center one ML-62i behind the listening area, tweeters pointed toward the left and right
of the room. Bridge the speaker for mono and connect the amp's rear channel.
(Fig. 2d)
7.1-Channel Surround + Rear Placement Using Two Speakers
Place one ML-62i on either side of the listening area. Orient so one tweeter of each
7