(Waste Electrical and Electronic Equipment) from whom you purchased this product, email info@ directive effective August 13, 2005, we martinlogan.com or visit the distributor locator at www. would like to notify you that this product may contain martinlogan.com. regulated materials which upon disposal, according to...
• Ruler this document requires specific • Level documentation from MartinLogan. • Electric drill and 1/4” and 1/8” drill bits • Phillips screwdriver Note: This speaker is not magnetically shielded and therefore should not be placed directly beside Required hardware (included): or atop a CRT television.
Fig. 3 Fig. 4 Fig. 5 4 Using the 1.5-inch Phillips screws, mount the 1 Using a Phillips screwdriver and a #8 x 3/4- wall bracket(s) as shown (fig. 3). inch screw, attach both horizontal stands to the back of the speaker (fig. 4). 5 Hang the speaker, guiding the wall mount bolts into the keyholes.
• Check that all system components are turned on and source material is playing. • Check speaker wires and connections. • Check all interconnecting cables. • If you are unable to resolve your problem, please contact your dealer or MartinLogan cus- tomer service.
WARRANTY INFORMATION SERVICE Your speakers are provided with an automatic Should you use your MartinLogan product in a Limited 90 Day Warranty coverage. You have country other than the one in which it was originally the option, at no additional charge, to receive a purchased, we ask that you note the following: Limited 5 Year Warranty coverage.
MARTINLOGAN MOTION SLM XL: WITH VERTICAL STAND ® L a w r e n c e , K a n s a s , U S A t e l 7 8 5 . 7 4 9 . 0 1 3 3 f a x 7 8 5 .
Page 11
g u i d e d e l ’ u t i l i s a t e u r...
Page 12
WEEE. Nous vous encourageons à recycler les matéri- À cette fin, MartinLogan a demandé à ses distributeurs dans aux d’emballage et autres matériaux d’expédition selon les pays membres de l’Union européenne de reprendre et les procédures normales.
Fig. 3 Fig. 4 Fig. 5 Matériel nécessaire (compris) : PAS un montant, élargissez le trou de guidage à l’aide d’un trépan de 1/4 po, puis installez un • #8 – vis Phillips de 3/4 po ancrage mural à cet endroit (fig. 3). •...
• Si vous n’est pas capable de résoudre votre prob- sont allumées et que le matériel source est lu. lème, veuillez communiquer avec votre revendeur • Vérifiez les câbles de l’enceinte et les raccords. ou le service à la clientèle de MartinLogan.
à la lientèle Le service à la clientèle de MartinLogan est dis- (785) 749-0133 ou en envoyant un courriel à ponible du lundi au vendredi, de 8 h à 17 h l’adresse service@martinlogan.com. (heure normale du Centre) en composant le enseignements énéraux...