Connecting The Monitor - @Xi Computer Corporation Mtower User Manual

Chapter 2, Getting Started

Connecting the Monitor

Power
Mouse
Keyboard
Printer
Monitor
Line
Joystick
Figure 2-2. Back of ATX Computer Systems
The following procedure describes how to connect the monitor to your computer.
When performing these steps, refer to
1. Verify that the monitor power switch is turned off.
2. Connect the monitor cable to the monitor. If you need assistance, consult the
monitor manual supplied with your computer. (Skip this step is the monitor
cable is already attached to the monitor.)
3. Locate the monitor connect on the system unit and attach the other end of the
monitor cable to that connector.
Figure 2-1 on page 11
Page 12
Phone
Speakers
or Figure 2-2, above.