Viking F-1 Installation Instructions Manual page 23

Class i; class ii; class iii; class iv gate operator

Hide thumbs Also See for F-1:

Table of Contents

! IMPORTANT:

This gate operator uses mechanical limit switches. Therefore, the limits

cannot be set electronically by the control board. The Limit Buttons on the control

board have been rendered inactive.

TECHNICAL TIP:

Each Limit LED will illuminate solid when the corresponding limit switch

is actuated. The LEDs will flash simultaneously while both limit switches are actuated at

the same time. This display may indicate a problem with the limit switches or wires.

"Open Limit" LED

indicates the gate is

at the open limit.

VIKING TECHNICAL SUPPORT 1.800.908.0884

LIMITS SETUP

"Close Limit" LED

indicates the gate is

at the close limit.

2 1

Table of Contents

Show Quick Links

Table of Contents

Class i Class ii Class iii Class iv