4. Rotate the swivel base counter-
clockwise until it is stopped by the
tenon on the display.
5. Carefully lift the display upright and check the installation. Move the
display to the position where it will be placed.
5. Getting to know your display
Front view
No.
Name
1
Power indicator
Remote control
2
sensor window
3
Speakers
3
Description
• Lights up green when the display is powered on.
• Lights up red when the display is in standby mode.
• Flashes red when the display is in power saving mode. See
"ECO" on page
26.
Receives command signals from the remote control. Do
not obstruct the sensor by placing any objects in front of
it, which will hinder the reception of signals.
Left and right speakers for reproducing stereo audio.
Section 1: Quick Start Guide
1
2
5