Completing The Installation; The Start Display - Gigaset T300 PRO Administrator's Manual

Resetting the system

Completing the installation

¤
Remove the USB stick from the drive and restart the computer.
Gigaset T300 PRO / Gigaset T500 PRO can now be configured and operated in the Internet
browser from any computer within the local network. To do this, enter http:// and the IP
address of the Gigaset T300 PRO / Gigaset T500 PRO server into the web browser's
address bar. The IP address is shown on the start display.

The start display

After restarting the server, the start display appears showing the IP address of your
Gigaset T300 PRO / Gigaset T500 PRO device.
¤
To log into the system, press Alt+F2.
¤
Click on OK to open the diagnostic and admin menus.
In the diagnostic menu, you are supplied with general information about the system, e.g.,
available memory, operating time, version of operating system etc.
In the admin menu, you can restart or switch off the system, for example, or amend the
IP address if no DHCP server is available.
88