Main Menu - Runco VX-6000d Owner's Operating Manual

Operation

Main Menu

Overscan +
Downloaded From projector-manual.com Runco Manuals
Press MENU on either the remote control or built-in keypad (on the projector rear panel)
to display the Main Menu, shown in Figure 4-7. The Main Menu is the starting point for
calibrating the VX-6000d to optimize the display of digital 1080i and 1080p sources.
Picture Adj.
Picture Memory
Contrast
Brightness
Color
Tint
Sharpness
CLR Temp.
White Balance
RVR :Iris
Lamp Power
Advanced
Default
Figure 4-7. VX-6000d Main Menu (1080i Digital or 1080p Sources Only)
To use the on-screen menus:
1. Press or
2. Press or
3. For items that present a list of choices, such as Picture Memory:
a Press ENTER or
b Press or
c Press ENTER again to confirm your selection.
d Press to return to the menu.
– OR –
For items that are represented by numeric values, such as Contrast:
a Press or
b Press or
– OR –
a Press ENTER to hide the "parent" menu and display only the slidebar for that item.
- 5
b Press or
c Press or
4. To switch from one sub-menu to another (for example, Picture Adjust to White
Balance), press
5. Press MENU to hide the OSD menus.
White Balance HD/RGB Adj.
1
0
0
0
0
0
7500
1
1
Hi
to select a sub-menu.
to select a sub-menu item.
.
to select a value from the list.
to adjust the value.
to select another menu item.
to adjust the value.
to select another item to adjust or ENTER to return to the menu.
repeatedly until no menu item is highlighted. Then, press
66
Options
Runco VX-6000d Owner's Operating Manual
Language
or .