If you are installing an AutoScope-equipped VX-6000d, use the supplied hardware to
attach the ceiling mount extension brackets to the bottom of the projector as shown in
Figure 3-7.
For ceiling installations, these brackets bring the mounting points for the projector
mounting plate (included with the ceiling mount kit) from the bottom of the projector up
and around the lens motor housing. For floor installations (where the projector is upright),
the brackets allow the projector to lie flat on the mounting surface.
Ceiling Mount
Extension Brackets
Figure 3-7. VX-6000d With Ceiling Mount Extension Brackets
Runco VX-6000d Owner's Operating Manual
Downloaded From projector-manual.com Runco Manuals
29
Installation
Install Ceiling Mount
Extension Brackets
(CineWide with
AutoScope)