Operation; Stand Alone-Mode; Control Board; Setting Solid Colors - EuroLite LED PAR-64 QCL Short User Manual

OPERATION

After you connected the spot to the mains, the EUROLITE LED PAR-64 QCL Short starts running.
The LED display lights up and you can choose the desired settings.
The device has two operating modes. It can be operated in Stand Alone or in DMX-controlled mode.

- STAND ALONE-MODE

Setting Solid Colors

Internal Programs
Sound Control / Sensitivity
- DMX MODE
STAND ALONE-MODE
In the Stand Alone mode, the LED PAR-64 QCL Short can be used without controller.
Disconnect the LED PAR-64 QCL Short from the controller.

Control Board

The Control Board offers several features: you can run the internal programs or set the
starting address.
Browse through the main menu by pressing MODE. You can change the selection by pressing
UP or DOWN. The functions provided are described in the following sections.
The display shuts off after 30 seconds of inactivity. With the touch of a button it lights up again.
Setting Solid Colors
Press the MODE button to select the solid color mode. When the display shows C, you can select the
desired solid color via the UP or DOWN buttons (see following graphic).
Mode:
C
Value:
C01
C02
C03
C04
C05
C06
C07
C08
C09
C10
C11
C12
C13
C14
C15
Function:
Red
Green
Blue
White
Medium yellow
Rose pink
Steel blue
Frost white
Dark pink
Light green
Dark blue
Light orange
Pink Carnation
Blue mist
Pure white
20/23 00064094.DOC, Version 1.0