Related Manuals for Kogan KAPORAIR09A
Summary of Contents for Kogan KAPORAIR09A
- Page 2 Important Safeguards........................2 Product Layout...........................3 Preparing for Use..........................4 Control Panel............................5 Operating from the Control Panel....................5 COOL Mode.............................6 DRY Mode............................6 FAN Mode............................6 SMART mode..........................7 Remote Control..........................7 Operating from the Remote Control..................8 COOL mode ...........................8 DRY mode............................8 FAN mode............................8 SMART mode..........................8 SLEEP function..........................9 SWING function..........................9 Setting the Timer..........................9 Programmed Shutdown......................9...
- Page 3 The materials used for packaging can all be used for recycling. • If the power cable is damaged, it must be replaced by a Kogan technician. • At the end of its service life, do not dispose of the air conditioner with the •...
- Page 5 These instructions will enable you to prepare your air conditioner for operation as efficiently as possible. Before use, make sure the air intake and outlet grilles are unobstructed. Air-Conditioning without installation Just a few simple steps and your comfort is ensured: Fit the air exhaust hose into the housing at the back •...
-
Page 6: Turning The Appliance On
COOL symbol DRY symbol FAN symbol HEAT symbol (not available in this model) SMART symbol SLEEP symbol FAN speed indicator Temperature indicator TIMER symbol 10. ON/OFF button FAN button SWING symbol 13. MODE button (selects modes) 14. Increase and decrease temperature buttons The control panel enables you to manage all of the main functions of the appliance, but to make full use of all of the product potential, you must use the remote control. - Page 7 Ideal for hot muggy weather when you need air conditioning and dehumidifying in a room. To set this mode correctly: Press the MODE button a number of times until the COOL • symbol appears. ▲ ▼ Select the target temperature by pressing the button until the •...
- Page 8 The air-conditioner will automatically select whether it should function in air-conditioning or fan mode. To set this mode: Press the MODE button a number of times until the SMART • symbol appears. Mode indicator Sleep indicator Selected temperature scale indicator Timer selection Fan speed indicator Swing indicator...
- Page 9 The first part of the controls on the remote control are the same as those on the control panel of the appliance. You should therefore refer to the instructions in the chapter to turn the appliance on and select the operating modes and fan speeds. The following section describes the additional functions corresponding to the controls on the bottom section of the...
- Page 10 This function is useful at night as it will gradually reduce the operation of the air-conditioner. Select the operating mode (cool/dry/smart) as • described above. Press the “ ” button. The appliance will continue to • operate in the previously selected mode. This function is useful for selecting the left/right swing of air delivery.
- Page 11 The appliance will start up again automatically when the defrosting Low Temperature process is complete. (Frost prevention) Contact the Kogan customer support team. Probe Failure (Sensor damaged) Empty the internal safety tank, following the instructions in the “End of Season Operations”...
- Page 12 Before cleaning or performing maintenance, turn the air-conditioner off my pressing the '' button on the control panel or the ON/OFF button on the remote control. Wait for 5 minutes, then unplug the unit from the wall power supply. You should clean the air-conditioner with a slightly damp cloth, then dry with a soft dry cloth.
-
Page 13: Cooling Capacity
• • Safety switch has triggered. Wait 30 minutes, if the • • problem persists, contact Kogan customer support. Air-conditioner works for a short time There are bends in the Position the air exhaust hose • • only. exhaust hose.
Need help?
Do you have a question about the KAPORAIR09A and is the answer not in the manual?
Questions and answers
Hello I have a portable air conditioner that I bought about 14 years ago and I had it running and it turned itself off and there is no display on the control panel, has it finally had the dong or is there a way to reset it maybe a fuse or something Regards Russel
If the Kogan KAPORAIR09A portable air conditioner has no display and won't turn on, follow these troubleshooting steps:
1. Check Power Supply – Ensure there is power available.
2. Check Plug Connection – Make sure the unit is plugged into the mains.
3. Check Safety Switch – If the safety switch has triggered, wait 30 minutes. If the problem persists, contact Kogan customer support.
These steps help identify common power-related issues preventing the unit from turning on.
This answer is automatically generated