Insert Tools, Accessories; Technical Data - Hilti TE 7-A Operating Instructions Manual

NOTE
Indication of the charge status is not possible while the power tool is in operation or immediately after
operation. Indication is given (LED 1 blinks) only when the battery is fully discharged or when it is too hot
(temperature >80°).

3. Insert tools, accessories

en
Insert tools and accessories for the TE 7‑A
Hammer drill bits
Forming and installation drill bits
Lightweight percussion core bits
Multipurpose hole saws
Pointed chisels
Flat chisel
Shaped chisels
Anchor-setting tools
Quick-release chuck for wood and metal drill bits
Keyed chuck
Wood drill bits
Metal drill bits
Metal drill bits / stepped drill bits
Charger
Charger
Battery
Battery
Dust module
Belt adapter (for B36/2.4 NiCd battery only)
Angular chuck

4. Technical data

Power tool
Rated voltage (DC voltage)
Weight in accordance with EPTA procedure 01/2003
Dimensions (L x W x H) with Li-ion
Dimensions (L x W x H) with NiCd and belt adapter
Drilling speed without hammering
Hammer drilling speed
Single impact energy
20
Ø 5 to 28 mm
Ø 5 to 20 mm
Ø 25 to 68 mm
Ø 25 to 82 mm, hexagonal
C-type connection end
C-type connection end
C-type connection end
C-type connection end
With smooth shank, hexagonal shank
With smooth shank, hexagonal shank
Ø 3 to 20 mm
Ø 3 to 13 mm
Ø 5 to 22 mm
C7/36-ACS
C4/36-ACS
B36/2.4 NiCd
B36/3.3 Li-ion
TE DRS-M
BAP 36
C-type connection end
TE 7‑A
36 V
4.9 kg
401 mm x 111 mm x 217 mm
387 mm x 107 mm x 217 mm
0 to 800 r.p.m.
740 r.p.m.
2.6 J