4
If you want to copy all the originals on the same size paper, press
the [DRAWER] button to select the drawer.
e.g.) Selecting the drawer of the equipment
When the mixed-size copying function is used, copy paper larger than the set original
cannot be used for copying. Use paper of the same size as the original or smaller. For
example, when mixed originals of LT and LD sizes are set, select the LT size paper or
smaller.
5
Select the other copy modes as required, and then press the
[START] button.
Copying starts.
When "Change direction ORG" appears
The originals are not placed in a correct direction. Press the [ENTER] button to exit the
original. Then place it by rotating 90 degrees and resume copying.
When the copying has finished, press the [FUNCTION CLEAR] button.
Copying Different Sizes in One Go - MIXED-SIZE COPYING -
73