Specifying Both The Sizes Of The Original And The Copy Paper - Toshiba e-studio 165 Operator's Manual For Copying Functions

3 COPYING FUNCTIONS

Specifying both the sizes of the original and the copy paper

1
Place paper in the drawer.
2
Place the original.
3
Press the [ORIGINAL] button several times until the lamp of the
desired original size is lit.
e.g.) Selecting LG for the original
4
Press the [COPY] button several times until the lamp of the desired
paper size is lit.
e.g.) Selecting LT for copy paper
You can select the desired paper size with the [DRAWER] button in the same proce-
dure.
When standard size paper other than LD, LT, LT-R, LG or ST-R is placed, register this
size as "OTHER" size in advance.
The most appropriate reproduction ratio for both the sizes of the original and the copy
paper is set.
5
Select the other copy modes as required, and then press the
[START] button.
76 Zooming In/Out Copy Image
P.47 "Registering other standard sizes"