Changing Copy Setting On Each Job - Job Build - Toshiba e-studio 165 Operator's Manual For Copying Functions

4 ADVANCED COPYING FUNCTIONS

Changing Copy Setting on Each Job - JOB BUILD -

This function is useful for originals consisting of several jobs (= stacks). You can change settings
and scanning methods for each job, and when all the originals have been scanned under the dif-
ferent settings, they are copied in one go. A maximum of 250 pages can be handled in one go,
and a maximum of 5 jobs can be scanned.
Some functions cannot be used together with this function or may have some restrictions.
When the following functions are set for the first job, they are also set for the rest:
Paper size selection, Finishing modes, Image shift
Functions not available:
Mixed-size copying, APS, Copying booklet on both sides ("BOOK>2"), Specifying reproduction
ratio manually, XY zoom, Magazine sort, Dual page, 2IN1/4IN1, ID card, Annotation
1
Place paper in the drawer.
2
Set copy quantities.
3
Select "JOB BUILD" in the copy menu, and then press the [ENTER]
button.
FINISHING
IMAGE SHIFT DUAL PAGE
EDGE ERASE ANNOTATION
PAPER TYPE
104

Changing Copy Setting on Each Job - JOB BUILD -

DUPLEX 2IN1/4IN1
ID CARD
XY ZOOM
JOB BUILD JOB MEMORY