Verify Creation of a Fusion Drive or Dual Drive (Non-Fusion)
To verify that the Fusion Drive or Dual Drive (Non-Fusion) drive was created properly,
do the following:
1. Click the Apple icon located on the top left corner of the screen, and select
About This Mac from the drop-down menu.
2. Click the More Info... button and then select the Storage tab.
If everything was created correctly, you should see the following images
depending on your configuration.
Fusion Drive
Dual Drive (Non-Fusion)
WD Black² Fusion and Dual Drive Configuration for Mac
SETTING UP THE WD BLACK² DRIVE
Installation Guide
15