Create A Dual Drive (Non-Fusion) - Western Digital BLACK 2 Installation Manual

Create a Dual Drive (Non-Fusion)

To create a Dual Drive (Non-Fusion), use the Create Dual Drive Volumes utility.
1. Locate the WD Black² Configuration Utility that you downloaded from the
"Getting Started" section, and unzip it on your desktop.
2. Double-click the Create Dual Drive Volumes utility. A warning message
appears.
3. Read the warning message and click OK.
In a few minutes the following message will appear, indicating that the Dual Drive
was successfully created.
4. Click OK.
5. To verify your configuration, continue to the section,
Drive or Dual Drive (Non-Fusion)."
WD Black² Fusion and Dual Drive Configuration for Mac
"Verify Creation of a Fusion
SETTING UP THE WD BLACK² DRIVE
Installation Guide
14