Getting Started
1
This document is intended to guide you through the process of installing your new
WD Black² as a Mac Fusion or dual drive (non-Fusion) configuration.
Important: To install the WD Black² dual drive, you must have a Mac
System that supports a 9.5 mm (2.5") drive with Mavericks OSX 10.9.x.
Items needed to perform this process:
A Phillips screwdriver with "0" tip head
SATA to USB adapter cable (included in retail box)
Image Backup of Mac System drive (Refer to your Apple system documentation
for information on using Time Machine.)
A blank 2 GB, or larger, USB flash drive
Download the following zip files to your local drive. These will be needed in the
procedures that follow.
WD Black² Firmware Update for Mac
WD Black² Configuration Utilities for Mac
GETTING STARTED 1