Table of Contents
Advertisement
PAIRING WITH BT2 USB ADAPTER
Your VoxStar UC headset is pre-paired with the BT2 USB Adapter. If you need to re-pair your
headset, or pair the BT2 with a different headset, follow these steps:
1.
Place the headset into pairing mode.
2.
Insert the BT2 into a USB port on the computer.
3.
The adapter will initialize and enter pairing mode while the computer installs any necessary
driver files. The BT2 LED will flash quickly. The headset should connect with the adapter
either during initialization or shortly after. Note: If the adapter and headset do not pair the
first time, unplug the adapter and repeat this procedure.
Make sure your PC's sound settings have the VXi BT2 USB Adapter as the default microphone
and/or speaker. Go to www.vxicorp.com/usb for more information on configuring your specific
operating system.
VXi VoxStar UC User Guide
13
Advertisement
Table of Contents
