Pairing With A Cell Phone - VXI VoxStar UC User Manual

PAIRING WITH A CELL PHONE

Keep headset and phone no less than 3 inches and no more than 3 feet apart while pairing. Keep other
Bluetooth devices at least 50 feet away, or turn them off. NOTE: The headset can be paired with up to 8
different devices but can only be connected to one at a time. It can only switch back and forth between 2
devices in Multipoint Mode.
1. Turn headset off.
2. Press the MFB until the light rapidly flashes blue and you hear the audio prompt "Power On" (in English)
and keep holding until you hear "Discovering" (in English). IMPORTANT: Wait for all audio prompts and the
blue, rapidly flashing light. This may take up to 8–10 seconds. Release the MFB.
3. Put your cell phone into Bluetooth Search/Scan Mode per the manufacturer's instructions.
4. Wait while the devices discover each other: This could take up to 2 minutes. Once the phone discovers the
headset, select "pair" and enter a passcode of "0000" if instructed. Once pairing is complete, the head-
set's rapid blue light will stop flashing and the phone may prompt you to 'connect' to the headset. Enter
"Yes" on the phone if prompted to connect to the headset. When connected, you'll hear the voice
prompt (in English), "Your headset is connected," and the blue light will flash slowly (once
every 3–4 seconds), indicating that the headset is in Standby Mode and ready to make or
receive calls.
12
VXi VoxStar UC User Guide