RESET PAIRED DEVICES LIST
The headset must be on to perform this function.
To reset the headset's internal paired devices list, hold the headset near your ear. Press and hold
the Volume Up and the Volume Down buttons simultaneously for approximately 6-10 seconds until
two low tones are heard.
This procedure may be necessary if the headset will not pair or connect to a device.
NOTE: Pairing information for devices previously paired with the headset will be lost. Headset will
need to be paired to the device after reset has occurred. If Multipoint Mode was enabled at the
time of reset, the headset will remain in Multipoint Mode.
23
VXi VoxStar UC User Guide