Operation; Overview Of Control Elements - ABB -i-Bus-KNX Millenium Technical Reference Manual

KNX Technical Reference Manual
®
ABB-i-Bus -KNX Millenium
8

Operation

8.1

Overview of control elements

Fig. 9: Control and display elements
Position Control / display elements
1 Button for selecting the fan speed level
2 Rotary control element
3 Button for adjusting the set value
4 Button for activating the ECO mode (e.g. during your absence)
5 Display
6 Button for activating / deactivating the room temperature controller
Note
• The basic setting of the display always indicates the set-point temperature or the fan speed
level.
• Starting from paragraph "General control and display functions" on page 21 the individual
functions and associated control steps are presented.
• The default setting of the display always indicates either the set-point temperature or the fan
speed level (parameter setting in Power-Tool)! Only the set-point temperature is dealt with in
the following!
• For the colour of the indications in the display observe paragraph "LED colour concept" on
page 20.
KNX Technical Reference Manual | 1473-1-7819
Operation
— 19 —