Quick Reference - Sharp AQuas LC-46D62U Operation Manual

QUICK REFERENCE
STOP! To safely remove the AQUaS television from the box
• It's best to use 2 people to remove the AQUaS television for stability.
• Lift onto installation location as the diagram illustrates.
Ventilation
&
Cleaning Tips
Keep your AQUaS television in a well ventilated area and make sure not to place it by a heat
source or use near water. The AQUaS television is designed for AC use only and should be
used with supplied AC cord.
Clean the screen by spraying a soft lint free cloth with water to lightly moisten. Gently wipe and "-
\CJj\.
-~_~./
. ./
avoid pressing on the screen. To clean the outer cabinet, use the same method. Do not use
/J#rt:;J
II
l
-=-
liquid or aerosol cleaners.
I ; (
U ~!
"
The screen is glass and can be scratched or broken when dropped or impacted.
QUICK INSTALLATION TIPS
Attach your antenna to the back of the
AQUaS television. (See page 12.)
How to turn on the AQUaS television for the
first time.
A) Press POWER on AQUaS television.
- VOL
+
v
CH A INPUT
POWER
B) POWER indicator on the front of the AQUaS
television lights GREEN.
----------'IJ
Connect the AC plug for the AQUaS
television into the AC outlet.
------"l~
-lAC
outlet
I
e
Place the 1V close to the AC outlet, and keep the power
plug within reach.
POWER SLEEP
ope
o
0
®
a a
e
TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT
TOUCH UN-INSULATED PARTS OF ANY CABLES
WITH THE AC CORD CONNECTED.
Place the Ferrite core in the space indicated
in the below figure and bundle the cords
properly with cable clamps and a cable tie.
POWER indicator
• Speakers cannot be detached from the 1V.
e
1V angle cannot be adjusted.
Ferrite core
@-7