Using External Equipment Ii; Displaying An External Equipment Image; Input Select - Sharp AQuas LC-46D62U Operation Manual

Using external equipment
To view external
sourc~
images, select the input source
from INPUT on the remote control unit or on the TV.
If the image does not come in clearly from the external
equipment connected to INPUT 1 or 2, you may need
to change the input signal type setting on the "Input
Select" menu.
INPUT FLASHBACK
o
Press
MENU
to display the MENU screen,
and then press ......
/~
to select "Option".
Press
~/T
to select the signal type you
want to set, and then press ENTER.
8
If the selected signal type is incorrect, images
are not displayed or displayed without any color.
Press
MENU
to exit.
G
The setting is stored and can be selected on the
"INPUT SOURCE" menu.
Press
~/T
to select "Input Select", and then
press ENTER.
• Refer to your external equipment operation manual for the
signal type.
• If you set INPUT 1 and INPUT 2 to Auto, the TV will
automatically select the input signal.
~
Check the operation manual of the external equipment for
the signal type.
• Setting INPUT 1 and INPUT 2 signal selection to "Auto"
when other equipment is connected will result in the
following connection priority.
INPUT 1 and INPUT 2:
CD
COMPONENT VIDEO
(g)VIDEO
POWER INPUT
FREEZE MENU
0 . . . . _
- VOL
+
v
CH A
VOL CH
SURROUND
j+)
(JMUTE
aU
v
a
Press INPUT.
6
A list of selectable sources appears.
Press INPUT again to select the input
source.
• An image from the selected source automatically
displays.
• Each time INPUT is pressed, the input source
toggles.
• You can also select the input source by pressing
1./..,.
e
If the corresponding input is not plugged in, you
cannot change the input. Be sure to connect the
equipment beforehand.
• See pages 13 and 14 for external equipment connection.
@-29