Sharp AQuas LC-46D62U Operation Manual page 18

Watching TV
Method 1
Using
CH
/\/V
on the remote control unit or on the
TV.
You can change channels in several ways.
- VOL
+
V CH A
o
INPUT POWER
Method 2
1 Press FLASHBACK to switch to the previously tuned
channel.
2 Press FLASHBACK again to switch back to the
currently tuned channel.
e
FLASHBACK will not work if no channel has been
changed after the TV is turned on.
Method 3
Using remote control buttons 0-9,
wp
(DOT) to select
channels for VHF/UHF/CATV/OIGITAL.
VOL
SURROUND
j+)
oU
INPUT FLASHBACK
o
CH
MUTE
o
To
se~ect
a 1 or 2-digit channel number
(ea
g., Channel 5):
Press
5~ENT
FREEZE
MENU
o~o
888
EXIT e------"') RETURN
O~O
- FAVORITE CH -
@@@@
AQuas
SHARP
" When selecting a 1-digit channel number, it is not
necessary to press 0 before the number.
e
When you enter 0-9 only, channel selection will be made if
there is no operation within a few seconds.
To select a 3-digit channel number
{e. g., Channel 115}:
Press
1~1~5
To select a 4-digit channel number
(e. g., Channel 22.1):
Press 2
~2~
• (DOT)
~
1
~ENT
• When you enter 0-9 only, channel selection will be made if
there is no operation within a few seconds.
~
If you push "0" by itself, nothing will happen.
6}
Complete the above steps within a few seconds.
• When you enter 0-9 and
I)
(OOT) , channel selection will be
made if there is no operation within a few seconds.
@-17