Remote Control Unit Preparation; Watching Tv; Turning Off The Power - Sharp AQuas LC-46D62U Operation Manual

Watching TV
Simple operations for watching a 1V program
- VOL
+
V
CH A INPUT
Press POWER on the 1V, or TV POWER on the
remote control unit.
e
POWER indicator (Green): The TV is on. (After a few
seconds, a window appears with sound.)
POWER
_ _ _ _ _----lIJ
POWER SLEEP
ope
o
0
Q
(J) @
POWER indicator
~
E
ope
indicator
SLEEP indicator
TV POWER (On/Standby)
TV
TV VCR
AUDIO
0 0 0
CBLlSAT DVD
FUNCTION
0 0
0
SOURCE LIGHT
8 §) @)
8
CB
8
REC
C!J 0 0
El (3 @ID
MODE
TV status indicator (POWER)
• The initial setup starts when the TV powers on for the first
time. If the TV has been turned on before, the EZ Setup will
not be invoked. See page 22 for performing EZ Setup from
the Setup menu.
Press POWER on the TV, or TV POWER on the
remote control unit.
e
The TV enters standby mode and the image on the screen
disappears.
• The POWER indicator on the TV gradually turns off.
• If you are not going to use this TV for a long period of time,
be sure to remove the AC cord from the AC outlet.
• Weak electric power is still consumed even when POWER
is turned off.
TV status indicator (Ope)
ON
OFF/Standby
Lighting (Green)
Lights off
"Off" is selected in OPC setting
"On" or "On: Display" is selected in OPC setting
• See page 25 for details.
TV status indicator (SLEEP)
"Off" is selected in SLEEP setting
"30", "60", "90" or "120" is selected in SLEEP setting
• See page 32 for details.
Lights off
Lighting (Green)
Lights off
Lighting (Red)
@-15