Input Label; Sleep Timer - Sharp AQuas LC-46D62U Operation Manual

Useful adjustment settings
Lets you set the input terminal displayed when using
the INPUT SOURCE menu or channel display.
Allows you to set a time when the TV automatically
switches to standby.
INPUT FLASHBACK
o
- FAVORITE CH -
0®@@
VOL CH
SURROUND
(+)
(JMUTE aU
v
a
FAVORITE
o
SLEEP AUDIO AV MODE
cc
DOD
Press SLEEP.
s
The remaining time displays when the sleep timer
has been set.
Sleep Timer: Remaining 30
Off
1-' 1
30
tl
120
1"' 1
Each time you press SLEEP, the remaining
time switches as shown below.
• When set, the time automatically starts counting
down.
• If you want to adjust the sleep timer, you can
press SLEEP twice then change the time
setting.
• Five minutes before the time expires, the
remaining time displays every minute.
• Select "Off" by pressing SLEEP to cancel the sleep timer.
• The 1V will enter the standby mode when the remaining
time reaches zero.
• When the sleep timer is set, its indicator on the TV lights
red.
Press
~/T
/
~/~
to select the new name for
the input mode, and then press ENTER.
Example
Press
£./T
to select "Input Label", and then
press ENTER.
Press MENU to display the MENU screen,
and then press .....
/~
to select "Setup".
Press INPUT to select the desired input
source.
Press
MENU
to exit.
• You cannot change labels if the INPUT SOURCE is TV.
@)-
32