Advertisement
Sensor Calibration
As the temperature or the sensor error, you may need to do the sensor calibration.
There are 2 ways to active Sensor Calibration Program:
1. Pull the ELE stick of transmitter to top position while Power on until hearing 2 beeps .
2. Via PC software.
Note:
Sensor Calibration Program may spends a lot of times,
hearing 2 beeps. The Tilt must be disconnected during the
How to place the GOPRO
X100B supports GOPRO1-3
The Lint paster must be used if using the GOPRO3
do not touch anything and keep the gimbal be horizontal during the calibration until
calibration. If the calibration is failed, the program can be operated again.
Please use a TAPE to fix the camera mount and make sure it is hard enough
Do not run the X100B without GOPRO
Make sure the center of gravity of GOPRO is at the correct position
Advertisement
