X-CAM A10-3H for GOPRO 3 Axis Gimbal User Manual
Accessories
Connection Instructions
functions.But2receiversarerequired.
Notice:ItdoesnotrequiredtosupplythepowertotheS-BUSreceiverunderthedualcontrolmode,theA10-3Hcontrollerwillsupply
thepowertotheS-BUSreceiverviatheS-BUS.
control.
( V2.00 )
The X-CAM A10-3H for GOPRO 3 Axis Gimbal has been finished
with all the adjustments before brought onto the market, it is
READY TO RUN.
Parameters
Weight: 280g(withoutGOPRO)
StabilizationFrequency: 5200Hz
InputVoltage(DCIN): 7.4v~16.8v(2S~4SLipo)
TiltTravel: +-90degree;RollingTravel: +-45degree
PanTravel: 360degreeswithunlimitedrotation
Built-inAVoutput&ChargingModule
AutoPilotSystemsupportingisnotrequired
Built-in2X6Axisgyroscopesensors&1Infraredlocalizer.
SupportsautomaticbacktoHOMEfunction.
SupportsGoPro3,GoPro3+,GoPro4(blackorsilverversion)
●
1xX-CAMA10-3HGimbalFrame
●
1xX-CAMA10-3HController
●
1xUSBCable
●
1xPPMCable
●
5xDampingballs
●
4xRubberrings
●
4xFastenerrings.
The S-BUS output comes with full functions which have been
definedchannelnumber:
Therecommendoperationmethods
1.Singlecontrol:JustconnectPPMchannelforPANControlling
orHEADFOLLOWING,HEADLOCKandAUTOBACKTOHOME
mode(Default), S-BUS channel connection is not required, One
receiveronly.
2. Dual control: Only S-BUS output channel mode provides full
The TILT and Pan axis (or Mode Switch) can be controlled under the single control or dual
Channel1:ROLLControlling
Channel2:ReturntoHOME
Channel3:TILTControlling
Channel4:PANControlling
Channel5:ModeSwitch