Advertisement
PC Software
Connect with PC
Uses the USB adapter to connect with your PC , Normally the Windows can find the driver automatically, you could find the PORT number in
the device Manager
Launch the X-CAM Gimbal Stabilization Module Assistant , choose the correct port number and click CONNECT
BEEP BEEP will be shouted after the connection succeed, the parameters will be read out automatically.
The parameters as below:
1.
Gains
There are 2 gains, Position Gain and Acceleration Gain
Pos. Gain: Inclined the gimbal to one position slowly and watch the image is horizontal or not, if not just adjust the Pos. Gain.
Acc. Gain: After adjusting the Pos. Gain, Inclined the gimbal to one position quickly and watch the image is horizontal in time, if not just
adjust the Acc. Gain.
Notice: the X100B has been finished the adjusting, does not need to adjust again in normally
Advertisement
