Usb Signal Source Operation - Haier LCD TV Manual

Basic Operation Instruction
Delete: Press ''Up/Down'' key on the remote control to select channel which you wish delete. Press
"1" key on the remote control, press "MENU" key to return .
Move: After select channel, press "2" key on the remote control, then press ''Up/Down'' key on the
remote control to select position where you wish place, then press "MENU" key on the remote
control to return.
Skip: Press ''Up/Down'' key on the remote control to select channel, press ''3'' key on the remote
control to open or close "Skip".
Select Channels with "CH+/CH-" Key
Press ''Channel'' key on the remote control or "CH+/ CH-" key on the control panel to select the
channels.
Select channels with the Return key you can go to the last channel when pressing the Return key.
For example, if the last channel is 10 and the current channel is 20, you will go to channel 10 when
pressing the Return key. You can switch the two favourite channels as you like.
Select Channels with Numeric Keys
1. Operations to select channels with 1 digit (0-9):
Press the number keys (0-9)on the remote control to select TV channel directly.
2. Operations to select channels with 2 digits (10-99):
Press the number keys with 2 digits (10-99) on the remote control to select TV channels.
3. Operations to select channels with 3 digits (100-199):
Press the number keys with 3 digits (100-199) on the remote control to select TV channels.
Note: With the mode of
functions and adjustments are similar with TV. User can check it at convenience.
connector can realize DVI connector function with external HDMI/DVI commutator.

USB Signal Source Operation

Please insert USB memory card into USB interface of TV, press "source" key on the remote control
or control panel to select USB signal source, press "OK" key to enter.
Note:
USB function support file format with video file/sound file/graphic file/text file. For some
nonstandard USB storage devices, may appear condition of unable recognize, please replace the
standard USB storage device.
Streaming media system to play a file for each format has certain limitations, if more than the
system limit, then play will be wrong
Do not pull up USB storage devices when system playing, this may result in system or equipment
problems
The system supports USB1.1 and USB2.0 connector, the standard transport protocol such as U
disk and removable hard disk storage devices.
AV1, AV2, S-VIDEO1, S-VIDEO2, YPbPr, PC, HDMI1, HDMI2,
13
all
HDMI