Power Connection; Computer Connection; Hdmi Digital Port Connection; Av1/Av2 Video Signal Connection - Haier LCD TV Manual

Installation & Connection
Attention: Please turn off TV power before the outdoor antenna is connected to the TV signal input
port. Outdoor antenna can't be located near the high voltage cables. Please pull out the plug of
outdoor antenna to avoid thunder shock in thunder weather.

Power Connection

Plug one end of the power cord into the input port of the machine's power supply and then insert the
other end into the socket of the electrical source (
Notes:
1. When connecting the power cord, be sure to turn off the machine and other equipment's power.
2. If a long time at leisure, please disconnect it from power supply
3. This TV must be connected to a three pin socket outlet for safety.

Computer Connection

Please connect one end of VGA cord with the output port of the computer (available for both
desktop or laptop computer), and another end of VGA cord with the input port of the VGA on its rear
cover.

HDMI Digital Port Connection

Connect external HDMI high signal source to HDMI digital input port of this machine through HDMI
digital connector cable; press "SOURCE" key to select "HDMI" signal source.

AV1/AV2 Video Signal Connection

Through composite cable, connect AV equipment
VIDEO output termination to this machine VIDEO
input, and AV equipment AUDIO output termination
to this machine AUDIO input, respectively.
Earphone Socket: The TV speakers will be shut
off when earphone is inserted into this socket.
(Please adjust the volume to a suitable size, to
avoid sounds excessive to affect the hearing.)
S-VIDEO nput onnection I C
Through S-VIDEO/AUDIO cables to connect external AUDIO/VIDEO equipment to the machine's
AUDIO/VIDEO input port, and press "SOURCE" key to select "S VIDEO" si

YPbPr/YCbCr Input Connection

If the signal source is DVD, Digital wired receiver or equipments with the YPbPr/YCbCr output,
recommends you to connect YPbPr or YCbCr output with the TV YPbPr/YCbCr input. In order to
obtains the better picture quality, at the same time, please connect its audio output with TV audio
input as shown in the following chart. If you choose the YPbPr/YCbCr signal, please set signal
source selection under YPbPr pattern.

AV Output Connection

If you need watch image of DV and connect your TV game machine, you can connect audio or video
output end of DV and game machine to the monitor.
AC 100V-240V, 60/50Hz).
-
7
R R
W W
Y Y
Earphone Socket
USB
CVBS, DVD Player or other
machine with CVBS/S-Video.
gna l source.