19T3/22T3
(
Basic Operation Instruction
Power On
Plug power cord into the electrical socket, press power switch button on right lower of the back cover , then press ''
key on the front panel, or press ''POWER'' key on the remote control to turn on the TV.
Standby
Press ''Power'' key on the remote control or press ''
Special Attention:
1.TV set will automatically turn to standby if there is no signal input for 5 minutes when the TV turns on.
2.TV set will automatically turn to standby when the preset time for turning off is reached.
Signal Source Selection
Press ''SOURCE'' key either on the remote control or on the front panel.''MENU OF INPUT
SOURCE'' will be displayed on the screen (Fig.5). Then press ''Up/Down'' key on remote
control or "CH+/CH-" key on the front panel to choose the signal source such as DTV, ATV,
AV, SCART, YPBPR, VGA, HDMI. Press ''OK'' key on the remote control or ''MENU" key on
the front panel and the TV will switch the current signal source to which you choose.
17
)(M D 119
S
)
'' key on the front panel . TV will be in standby.
''
Input Source
DTV
ATV
AV
SCART
YPBPR
VGA
HDMI
OK: Enter
Fig.5