Haier L26A9A Owner's Manual

Tft-lcd colour television receiver.
Hide thumbs

Advertising

Advertising

This User's Manual is applicable for the following models:
L26A9A, L32A9A, L32A1A, L37A9A-AK
Please read this manual carefully
before operating the unit, and keep
01
it for future reference.
0090506952C
TFT-LCD COLOUR TELEVISION RECEIVER
OWNER'S MANUAL

Advertising

   Also See for Haier L26A9A

   Summary of Contents for Haier L26A9A

  • Page 1

    TFT-LCD COLOUR TELEVISION RECEIVER This User's Manual is applicable for the following models: L26A9A, L32A9A, L32A1A, L37A9A-AK Please read this manual carefully before operating the unit, and keep it for future reference. 0090506952C OWNER'S MANUAL...

  • Page 2: Table Of Contents

    INCLUDED WITH THIS PRODUCT. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK AND FIRE, DO NOT PUT THE TV SET NEAR SOURCES OF HUMIDITY . DO NOT USE ANY ABRASIVE CLEANSERS WHICH MAY SCRATCH OR DAMAGE THE LCD SCREEN. AVOID CONTACT WITH OBJECTS THAT MAY SCRATCH THE LCD SCREEN.

  • Page 3: Warning And Caution

    WARNING AND CAUTION Please ensure that the set has adequate Do not place the set near a heat source or ventilation. in direct sunlight. During thunderstorms, unplug both the Do not put the unit near water or oil as it antenna and power plug to prevent may cause a fire.

  • Page 4: Buttons And Interface Position, Front Control Panel

    TV/AV switch button Program down/up button/item down/up selected Volume down/up button/item left/right selected and enter Power button Power indicator Remote sensor Back panel L26A9A-A/L32A9A-A/L32A1A-A L37A9A-AK POWER Side panel BUTTONS AND INTERFACE POSITION YPb/CbPr/Cr L-IN R-IN Y Pb/Cb Pr/Cr AUDIO IN...

  • Page 5: Preparation For Remote Control

    Cautions for using remote control interfere the signal sent by the remote Confirm there is no object between the control. In this situation turn the TV remote control and the remote sensor set to avoid the direct light source. of TV set.

  • Page 6: Remote Control Panel, Basic Operation, Power On/off Tv, Tv Program Selection And Volume Adjustment, Recall

    POWER ON/OFF TV Standby set: first connect the power supply wire, then turn the power switch on the back of TV set on(if there is a power switch button). 1. If the TV set is in standby status, press power...

  • Page 7: Tv Program Setting, Auto Search, Manual Search, Fine Tune, Skip

    SCREEN DISPLAY For your convenient operation and in order to know the TV set, we offer the below menus. Picture setting menu PICTURE PICTURE MODE PERSONAL CONTRAST BRIGHTNESS SATURATION TINT SHARPNESS STRONG NOISE REDUCE FULL SIZE MODE MOVE SELECT MENU EXIT...

  • Page 8: Image Control, Set Your Favourite Picture Mode, Noise Reduce

    TV PROGRAM SETTING FINE TUNE When you can not get a satisfactory picture effect, you can fine tune to obtain. 1. Press MENU and CH+/- button to select SOURCE menu and VOL+/- to enter. 2. Press CH+/- button to select MANUAL SEARCH, press VOL+/- button to enter the next menu.

  • Page 9: Picture Mode /sound Mode Selection, Sound Control, Sound Effect Control, System Setting Function

    OTHER SETTING FUNCTION SLEEP TIMER SETTING After you set the sleep timer, the TV set will count from the setting time, when the count time is coming, the TV set will turn off automatically. Press SLEEP button to enter off time set, you can...

  • Page 10: Pip Setting, Sound Source Setting, Color Temperature, Digital Filter Setting, Aaa Setting

    OTHER SETTING FUNCTION PIP SETTING This TV set support PIP function, it can display picture of two sources at the same time. 1.Press MENU and CH+/- button to select source menu. 2.Select PIP mode, use VOL+/- button to select P1S1, P1S2, P2S1, P2S2, P3S1, P3S2, P4S1, P4S2 or OFF mode, open PIP function.

  • Page 11: Child Lock

    VOL+/- to set the max volume(10-100) 5.Press CH+/- to select PW.CHANNEL and VOL+/- to set the channel number , then the TV can turn on to the channel you have set. 6.Press CH+/- to select CLEAR ALL and VOL+/- to unlock all the lock you have set.

  • Page 12

    Steam Media Broadcast System Stream media play prepare 1. Supporting equipment are used for internal files. This television can only play some AVI 1.Equipment supporting Mass and Storage agreements include USB, and MPG files of this format. Those mobile hard disk, card reader, some files with suffix of dat are not movie MP3 and digital camera.

  • Page 13: To Operate The Menu

    ZOOM HELP Note: If there are no operation one minute later, the TV will enter the saver automatically, at the time, press any button of USB system to exit the saver menu. To operate the menu 1. Press up or down to select the item with up or down.

  • Page 14

    Steam Media Broadcast System To enjoy music 1. Press up or down button to select "Music" option. 2. Press ENTER button to enter play menu. RETURN 3. Press up or down button to ENTER ZOOM HELP select desired music, and then press ENTER button to play music.

  • Page 15

    Steam Media Broadcast System To select the Music and PIC item 1. Press up or down button to select "Music and Pic" option, and press ENTER RETURN button to enter menu. ENTER ZOOM HELP 2. Press up or down to select desired file, and press button to ensure it.

  • Page 16: External Audio And Video Equipment Connection

    Note: The above parameters are VESA standard. Note: 1. If the temperature of the TV set is rather low, it is normal that there may be some artifacts when the set is first turned on. 2. Nonconforming pixels may occur on the panel, but they have no influence on the normal function of the display.

  • Page 17

    EXTERNAL AUDIO AND VIDEO EQUIPMENT CONNECTION Video connection HDMI D-SUB IN AUDIO IN YUV IN S-VIDEO OUTPUT S-VIDEO VCR VIDEO OUTPUT DVD player AUDIO OUTPUT Component connection HDMI D-SUB IN AUDIO IN YUV IN Pb/Cb Y Pb/Cb Pr/Cr output Pr/Cr Audio output EXTERNAL AUDIO AND VIDEO EQUIPMENT CONNECTION YUV AUDIOIN...

  • Page 18: Specifications

    SPECIFICATIONS The part specifications of this TV set provided here are for reference only. Difference may occur as product technology is updated. A-si TFT active maxrix Type Screen Viewable angle Color system PAL, NTSC (AV) Sound system DK, I, BG,MN...

  • Page 19: Trouble Shooting Guide

    This is normal and is caused by temperature changes of the operating environment and does not affect the operation of the set. 3.Do not let the TV set stay on a static images, as this can lead to permanent residual images. If this situation occurs, the TV set may recover normal automatically after 12 hours if you switch the TV set to dynamic programming.

This manual also for:

L32a1a, L32a9a, L37a9a-a, L37a9a-ak,

Comments to this Manuals

Symbols: 0
Latest comments: