Basic Operation Instruction; Power On; Standby; Signal Source Selection - Haier 42T51 User Manual

User manual

Hide thumbs

Table of Contents

Power On

Plug power cord into the electrical socket and press ''

press ''Power'' key on the remote control to turn on the TV.

Standby

Press ''Power''key on the remote control. TV will be in standby.

Special Attention:

1.TV

set

will automatically turn to standby if there is no signal input for 5 minutes

when TV turns on.

2.T

V set will automatically tu

reaches.

Signal Source Selection

Press ''SOURCE'' key either on the remote control or on the

front panel. ''MENU OF SIGNAL SOURCE'' will be displayed

on the screen. Then press ''Up/Down'' key on remote control

or "CH+/CH-" key on the front panel to choose the signal

source such as

TV, AV1, AV2, S-VIDEO1, S-VIDEO2, YPBPR,

HDMI1, HDMI2, PC, USB

control or ''MENU" key on the front panel and TV will switch

the current signal source to the signal source you choose.

Menu Operation Instruction

Press ''MENU'' key on the remote control or on the front panel. The TV will display the

main menu.

1. Press ''Left/Right'' key on the remote

control or ''VOL+/VOL-''key on the front

panel to select the adjustment sort menu,

which includes 5 sorts:

OSD, ADVANCE, TV.

2. Press ''Down''key on the remote control

or ''CH-'' on the front panel to enter the

adjustment sort menu.

3. Press ''Up/Down'' key on the remote control

or ''CH+/CH-'' on the front panel to select what is needed to adjust in sort menu.

4. Press ''Left/Right'' key on the remote control or ''VOL+/ VOL-''on the front panel to

adjust the value or setting.

5. Press ''Menu'' key to exit the main menu when the TV displays the Main Menu;

Press ''Menu'' key to return to previous menu when the TV displays the submenu;