Installation; Ac Power - Martin Mania SCX600 User Manual

2. I
NSTALLATION
A C p o w e r
The Mania SCX600/700 is supplied set up to match local voltage and
frequency settings. The factory setting is shown on the serial number
label.
Warning! For protection from fire and electric shock, the fixture must be
grounded (earthed). The power supply must have overload
and ground-fault (earth-fault) protection.
Check that power cables are undamaged and rated for the
current requirements of all connected devices before use.
Ensure that the fixture's voltage setting matches your local
AC power supply before applying power.
Important! Do not connect the fixture to a dimmer system, as this will
cause damage that is not covered by the product warranty.
Mania SCX600 po wer setting s
All Mania SCX600 models can be set to 115 V, 60 Hz or 230 V, 50 Hz AC
power using the switch on the connections panel.
• Set the switch to 115 V if you have110-120 V, 60 Hz AC power.
• Set the switch to 230 V if you have 220-240 V, 50 Hz AC power.
Mania SCX700 po wer setting s
• Mania SCX700 EU models can be set to 230 or 240 V, 50 Hz AC power
using the switch on the connections panel. Use the 230 V setting if you
have 220-230 V power, and use the 240 V setting if you have
230-240 V.
• Mania SCX700 US models do not have a switch and are supplied set
up for 110-120 V, 60 Hz AC power.

Installation

9