Table of Contents
Advertisement
Lamp hours
This readout can be used to monitor lamp life for replacement purposes.
There is a resettable lamp hours counter in this menu. Read the number of
hours the lamp has been powered on since the counter was reset in
seconds to reset the counter to zero each time you install a new lamp.
Read the total number of hours of lamp use since fabrication in
Start-up/ lamp strike coun ter
SCX600 displays the number of times the fixture has been powered on
since the counter was last reset. The SCX700 displays the number of
times the lamp has been struck since the counter was last reset. Press
[Enter] to display. Press [Up] for 5 seconds to reset the counter to zero
each time you install a new lamp.
(SCX600) or lamp strikes (SCX700) since manufacture.
Software version
version is also displayed briefly when the fixture is powered on.
M a n u a l c o n t r o l
The manual control menu (
fixture (
(
E f f e c t s t e s t
The test sequence (
quick check of fixture performance.
22
→
→
→
→
→
→
→
→
→
→
→
→
displays the fixture software version number. The software
), as well as striking the lamp (
). It also permits you to position and move individual effects.
Mania SCX600/700 user manual
. Press [Enter] to display. Press [Up] for 5
→
. Press [Enter] to display.
is a resettable start-up counter. The
displays the total number of start-ups
) provides commands for resetting the
→
) runs through all effects to provide a
), and dousing the lamp
Hide quick links:
Advertisement
Table of Contents
