Blind Spot Monitoring - If Equipped - RAM CV Cargo Van 2012 Owner's Manual

Illuminated Mirror
BLIND SPOT MONITORING — IF EQUIPPED
The Blind Spot Monitoring (BSM) system uses two radar-
based sensors, located inside the rear bumper fascia, to
detect highway licensable vehicles (automobiles, trucks,
motorcycles, etc.) that enter the blind spot zones from the
rear/front/side of the vehicle.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 117
Rear Detection Zones
When the vehicle is started, the BSM warning light will
momentarily illuminate in both outside rear view mirrors
to let the driver know that the system is operational. The
BSM system sensors operate when the vehicle is in any
forward gear or REVERSE and enters stand-by mode
when the vehicle is in PARK.
I n f o r m a t i o n P r o v i d e d b y :
3