Hardware Overview
Front Panel Ports
Console
Interface
Console
USB
RJ45
(eth0-eth7)
RJ45 (eth0-eth7)
USB
Description
RJ45 serial console port for Command
Line Interface (CLI) management. Use an
RJ45-to-DB9, serial console cable, also
known as a rollover cable, to connect the
Console port to your computer. (If your
computer does not have a DB9 port, then
you will also need a DB9 adapter.) Then
configure the following settings as needed:
• Baud rate 115200
• Data bits 8
• Parity NONE
• Stop bits 1
• Flow control NONE
Reserved for future use.
RJ45 ports support 10/100/1000 Ethernet
connections.