Time Schedule; System Setup; Product Information - Samsung SNP-3120 User Manual

Time schedule

You can configure so that an event will occur at a scheduled time regardless of the actual
occurrence of the event.
1.
From the Setup menu, select the
<event (
2. Click <Time schedule>.
To set the timer event
1. Set <Timer event setup> to <enable>.
2. Specify the <Activation time>.
Always : Always activates in operated

mode at the set interval.
Only scheduled time : Periodi-

cally activates in operated mode at a
specified time and date.
3. Specify the <Transfer interval>.
4.
Specify the activation conditions.
FTP sending : Specify the use of the FTP transfer if an event occurs.

Record : Specify the use of recording if an event occurs.

5. When done, click [Apply (

SySTem SeTup

product information

1.
From the Setup menu, select the
<System (
2. Click <product information>.
3.
Check the camera information, or
provide details according to your
network environment.
Location : Specify the location where

the camera is installed.
Description : Provide detailed

information about the camera location.
)> tab.
)> tab.
)].
English _