camera setup
uSinG THe CAmerA menu
Follow the steps below if you run the Web Viewer for setting the menus.
1.
Launch the Web Viewer.
2.
Click [Camera menu (
corner of the Live screen.
The camera setup menu appears.
3.
Use the Up/Down (▲/▼) buttons to move
to a desired item.
4.
Click [enter (
down (▲/▼) button to move to a desired
item.
5.
To access a sub menu item, click
[enter (
6.
To move to previous menu or exit the menu setup, click [Cancel (
: This arrow appears next to a menu that contains sub items.
If <IV analysis function> is enabled, camera's OSD menu operation can be set as an event.
J
CAmerA SeTTinG
You can set up the general functions of camera module.
Starting the menu
1.
Click [Camera menu (
2.
When main menu shows up on screen,
move to desired menu by using direction
button.
)] in the left
)]. Then, use the up/
)].
)] button.
main menu
Camera setting
p/t setting
osd setting
initialize
)] button.
English _