Baud Rate Settings; Communication Response Settings; Termination Settings - Samsung SNP-3120 User Manual

installation & connection

baud rate settings


Select the transfer speed of a selected communication protocol.
No. Baud Rate (BPS)
1
2
3
4

Communication response settings


Select a communication response method for the camera and controller: Response or No
Response.
SW2- #7

termination settings


To prevent the attenuation of communication signals between the camera and controller,
the items at the end of line must be set up with the termination settings.
Camera Input Position
Termination of Longest Path
- This model is provided with factory defaults of all DIP switches set to OFF. The
default settings are shaded in the table.
20_ installation & connection
2,400
4,800
9,600
19,200
Function
Response Mode Switch
On the Path
SW2-#5
ON
ON
OFF
OFF
ON
Response
SW2- #8
SW2-#6
ON
OFF
OFF
ON
OFF
No Response
ON
OFF