Toshiba Tecra A9 Series User Manual page 53

12
(Sample Illustration) Inserting the memory module into the socket
13
latch
(Sample Illustration) Pressing down on the memory module
(Sample Illustration) Inserting the memory module into the slot
Downloaded from LpManual.com Manuals
Firmly press the memory module into the memory slot's socket
at approximately a 30-degree angle (to the horizontal surface
of the computer).
Once the module's connector is fully inserted into the socket,
press downward on the top edge of the module to seat the
module into the latches at the sides of the socket. These latches
should "snap" into place securely with the corresponding
cutouts in the side of the module. If the latches and cutouts do
not line up correctly, repeat steps 12-13.
Do not force the memory module into position. The memory
module should be completely inserted into the socket and level
when secured in place.
Getting Started
Adding memory (optional)
latch
53
Slot B
Slot A