Directing The Display Output When You Turn On The Computer - Toshiba Tecra A9 Series User Manual

3
4

Directing the display output when you turn on the computer

Once you have connected an external display device, you can
choose to use the internal display only, the external device only, or
both simultaneously. The quickest way to change the display output
settings is to use the display hot key (
NOTE
1
2
(Sample Image) Display options window
3
Downloaded from LpManual.com Manuals
Turn on the external device.
Set the display mode by pressing
Display Properties settings.
Some modes are only available with the appropriate device attached
and turned on.
Press and simultaneously.
Fn F5
While holding down
you want takes effect. Briefly pause each time you press the
key to allow time for the display to change.
This hot key cycles through the settings in the following order
(only the first option is available when you do not have an
external monitor attached) (the last option is available only if
you are in extended display mode):
❖
LCD—Internal display only
❖
LCD + CRT—Internal display and external monitor
simultaneously
❖
CRT—External monitor only
❖
LCD + CRT—Internal display and external monitor
simultaneously, extended display mode
Release the Fn key.
Getting Started
Using external display devices
Fn + F5
+
Fn
Fn , press F5 repeatedly until the setting
, or by configuring the
):
F5
67
F5