Initiating A Conference - Gigaset DX600 A ISDN User Manual

Making calls using network services
Please note
u
Without CLIP, a waiting call is only
announced with a signal tone.
u
An internal, waiting call is shown on
the display. You can neither accept
the internal call nor reject it.
u
How to accept a waiting external call
during an internal call
Rejecting a waiting call
You can hear the call waiting tone but do not
want to speak to the caller.
§Reject§
Press the display key.
The caller hears the busy tone.
Consultation calls (external)
You can call a second external caller. The first
call is placed on hold.
During an external call:
§Ext.Call§
Press the display key.
The previous call is placed on
hold. The other participant
hears an announcement.
~
Enter the second participant's
telephone number.
The phone number is dialled. You are con-
nected to the second participant.
If the caller does not answer, select the dis-
§End§
play key to return to the first participant.
Please note
You can also select the second partici-
pant's phone number from the directory
(page 49) or a call list
Ending a consultation call
¢
§Options§
End Active Call
You are reconnected to the first caller.
You can also end the consultation call by
replacing the receiver. The connection is
briefly interrupted and you will receive a call
back. As soon as the receiver is lifted, you are
reconnected to the first call participant.
40
¢
( page 80).
(page 49).
Call swap
You can speak to both callers one at a time
(call swap).
Prerequisite: You are conducting an exter-
nal call and have called a second participant
(consultation call) or have accepted a wait-
ing call.
¤
Use q to swap between the participants.
The caller you are currently speaking to is
marked with the æ icon.
Ending the active call.
¢
§Options§
End Active Call
You are re-connected to the waiting caller.

Initiating a conference

You can speak to both participants simulta-
neously.
Prerequisite: You are conducting an exter-
nal call and have called a second participant
(consultation call) or have accepted a wait-
ing call.
¤
Pressing the display key
You and the other two callers (both marked
by the æ icon) can hear and speak to each
other simultaneously.
Ending a conference
¤
Press the display key
You return to "call swap" status. You are
reconnected to the caller with whom you
started the conference.
Or:
Prerequisite: ECT is not activated.
&
Replace the receiver to end the
call with both participants.
Each of the callers can end their participa-
tion in the conference call by pressing the
end call key and replacing the handset.
§Conf.§
.
§EndConf§
.