ESIE02–01
1.17
Using Conditions for Remote Control Thermostat
Applicable units
All units
Wired remote
The remote control thermostat is only available in wired remote controls.
controls
Conditions in which
Even when the "use remote control thermostat" is selected in service mode, the remote control
the rem. contr.
thermostat is not always used.
thermostat is not
used
The table below contains the conditions in which the remote control thermostat is not used.
Condition
1
2
3
Cooling
The diagram below shows the operation range of the set temperature/air suction temperature
combination.
Heating
The diagram below shows the operation range of the set temperature/air suction temperature
combination.
Part 2 – Functional Description
The remote control thermostat is not
used when...
The remote control thermostat malfunctions.
The "one remote control group control" is
selected.
The set temp./air suction temp. combination
is out of range. See further in this section.
ts: Set temp.
(˚C)
ts: Set temp.
(˚C)
General Functionality
Except...
—
For simultaneous ON/OFF operation.
When the automatic operation is
selected. If so, the remote control
can be used.
Remote control thermostat
operation range
Differential zone
th: Suction air temp.
(˚C)
Remote control thermostat
operation range
Differential zone
th: Suction air temp.
(˚C)
1
2
3
4
5
2–23