Pinell Supersound II Instruction Manual page 48

8.11 The Way to Download Pinell via Apps:

Note that the first generation of iTouch/iPhone is not compatible with App.
1. In your iPod Touch/ iPhone/iPad's main menu,
open the App Store by click the App store
icon, as photo at right side shows:
2. In the App store, search for 'Pinell Remote
App'.
3. Touch 'Pinell'
Click again to install. You would invite to enter your user name and password. You should only
have to enter your username once and your iPod Touch/iPhone/iPad will remember it, but you will
need to always enter a password to prevent just anyone from downloading apps to your
equipment.
4. Once your iTouch/iPhone/iPad has started downloading the app, a status bar will show up to indicate
how long it will take to download. Once it is complete, you can access your Pinell radio anytime via
a simply touch
8.12 The Way to Play Your Radio via Apps:
1. For initial use, touch your radio icon
Remote Pin code', the default code is 1234, you can give a user-defined code via you radio: press
MENU  < Main menu > < System settings >  < Network >  < Netremote PIN setup
2. Want to keep you App works while your radio under stand mode? It needs set to 'yes' for Keep
network connected. The path is:
Press MENU  < Main menu > < System settings >  < Network >  < Keep network
connected > Yes, press SELECT to confirm.
icon, and then hit the "free" button, it will then change the "free" to "install".
.
, your device pop-up a dialog box envites you input 'Net
45
>.